Applicable materials
The MIM is suitable for a wide range of materials, including low-alloy steel, stainless steel, tool steel, nickel-based alloys, tungsten alloys, cemented carbides, titanium alloys, magnetic materials, Kovar alloys, and so on.
Material Classification | Material Grade | Application Field |
|---|---|---|
Iron-Based Alloys | Fe-2Ni, Fe-8Ni 310 | various structural parts in automobile, machinery and other industries |
Stainless Steel | 316L ,17-4PH, 420, 440C | medical equipment, watch parts |
Carbide | WC-Co | various knives, clocks, watches |
Ceramics | Al 2O3 , ZrO2 , SiO2 | it electronics, daily necessities, clocks |
Heavy Alloy | W-Ni-Fe, W-Ni-Cu, W-Cu | communication, daily necessities |
Titanium Alloy | Ti,Ti-6Al-4V | medical, aviation |
Magnetic Material | Fe, Fe50Ni, Fe-Si | various magnetic performance parts |
Tool Steel | 42CrMo4,M2 | various tools |
Copper Alloy | - | thermally and electrically conductive applications |
Material | Density g/cm 3 | Hardness | Tensile Strength MPa | Elongation | |
|---|---|---|---|---|---|
Iron-Based Alloys | PIM-2200（Sintered） | 7.60 | 45HRB | 290 | 40 |
| PIM-2200（Sintered） | 7.60 | 69HRB | 440 | 26 | |
| PIM-4605（Sintered） | 7.60 | 62HRB | 415 | 15 | |
| PIM-4605（Quenching, Tempering） | 7.60 | 48HRC | 1655 | 2 | |
Stainless Steel | PIM - 316L （Sintered） | 7.85 | 67HB | 520 | 50 |
| PIM- 17-4PH （Sintered） | 7.5 | 27HRC | 900 | 6 | |
| PIM- 17-4PH （Sintered） | 7.5 | 40HRC | 1185 | 6 | |
| PIM - 440C （Sintered） | 7.5 | 65HRB | 1655 | 25 | |
Tungsten Alloy | 95%W-Ni-Fe | 18.1 | 30 | 960 | 25 |
| 97%W-Ni-Fe | 18.5 | 33 | 940 | 15 | |
Fine Ceramics | Al2O3 | 3.9 | HRA92 | Bending strength | - |